IET logo
Wiring Matters

Wiring Matters - March Issue 2017

18th Edition of BS 7671: send us your feedback

Wiring Matters gives you the details on how you can see and comment on the 18th Edition of the IET Wiring Regulations.

The IET is preparing to publish the Draft for Public Comment (DPC) of the 18th Edition of BS 7671. This is your chance to have your say about the development of the new edition of the Wiring Regulations.

Important dates

Please note, the below dates are expected dates only and are subject to change.

• DPC availability and commenting period: June 2017 – August 2017.
• IET and committees review DPC comments: August 2017 – November 2017. 
• Changes approved; final draft produced; reviewed and proofread: November 2017 – April 2018.
• Official JPEL/64 committee sign off: 4th April 2018.
• BS 7671 new edition available for purchase: 1st July 2018.

BSI and its role in setting Standards

BS 7671 is a British Standard. It is published jointly by the British Standards Institution (BSI) and the IET. BSI is the UK's National Standards Body (NSB).

Standards are developed by committees of dedicated experts. In the case of BS 7671, there are four committees that feed into the main BSI/IET joint technical committee JPEL/64:

• JPEL/64/A – covers verification and inspection and testing (Part 6 and Appendix 6 of BS 7671) plus any work relating to Parts 1, 2 and 3 of BS 7671.
• JPEL/64/B – covers cable sizing and installation and related matters (some of Parts 4 and 5, Appendices 3 and 4 and some Part 7 items of BS 7671).
• JPEL/64/C – covers earthing installations and related matters (some of Parts 4 and 5 and some Part 7 items of BS 7671).
• JPEL/64/D – covers the remainder of Parts 4 and 5, some Part 7 items and some Appendices of BS 7671).

Together, these groups are responsible for UK input into international and European technical committees IEC/TC 64 and CENELEC/TC 64, which produce the IEC 60364 standards series and the European implementations HS 60364 series. These standards are then implemented here in the UK as BS 7671.

Updates to BS 7671

As technology develops and is used differently, BS 7671 needs to be updated to ensure good practice across the industry. Updates can be in the form of an Amendment or an Edition:

Amendment – alteration and/or addition to previously agreed technical or editorial content of an existing standard.
Edition – a new edition of an existing standard will either be published after several amendments (usually, a maximum of three) have been published or a major revision of the technical content has taken place.

The committees will discuss how sections  of BS 7671 may need to be changed to either remain aligned to the international and/or European Standards or take into account national issues Any changes proposed are debated, refined and finalised at JPEL/64.

The updated BS 7671 will then be released in the form of a Draft for Public Consultation (DPC). This is when you will have the opportunity to read the expected changes in BS 7671 and to have your say.

Comments on the standard can be submitted to the Secretariat at any time but will usually be held for consideration at the next Amendment/Edition cycle.

Comment on the DPC of BS 7671

The DPC of the draft 18th edition of BS 7671 will be published on the BSI Standards development portal: https://standardsdevelopment.bsigroup.com/.

First, register following the on-screen instructions. Once you have successfully registered, you can log in to read and comment on proposed and draft standards, including BS 7671. You can also go into your Account to update information about yourself, change your password and personalize your preferences.

When commenting on draft standards, use the ‘Comment on this section’ field to make your comments and the ‘Proposed changes’ field for any clarification and to make a suggestion for improvement.

Screenshot of draft for public comment page  
 
Example of the comment page

You will be able to view the content of the whole draft document and provide a comment on each section.

Screenshot of draft view  
 
Example of the add/view comment fields

There are three types of comments you can add:

• general – general comments on the standard as a whole or comments that are neither technical nor editorial;
• technical – comments on the technical content of the standard; and
• editorial – purely editorial comments such as corrections to spelling or rewording to express the technical point more clearly.

Please note: your comment is more likely to be accepted if a constructive alternative is provided.

When you have finished using the Standards Development Portal, you can safely logout.

Other useful features

You can:

• follow a Standard’s progress – register your interest on the Standard’s homepage and receive regular updates.
• look at JPEL/64’s activity and progress – simply click ‘Show Committee Standards Activity’ on the BS 7671 page.
• see the development of various documents through the JPEL/64 process: although the documents themselves won’t be available for you to view until public comment stage, you can register to follow the development.
• save your comment for future editing (you will be prompted to submit your comment ahead of closure of the DPC).
• remain anonymous throughout the DPC process.

Find out more

You may also want to find out more about becoming a technical committee member.

You can also read more about the benefits of standards.

For further queries and information regarding:

• BSI as the UK National Standards Body – visit the BSI Group website.
• published standards and how to purchase standards – visit the BSI Shop.
• further information about BS 7671 – subscribe to Wiring Matters; it’s free. Geoff Cronshaw’s most recent article discusses the changes likely to BS 7671 in the 18th Edition.

In this issue

Email alerts

Don't miss new articles

Sign up for quarterly notifications of new articles from Wiring Matters

Download